Description
CLEANING THIS FILTER IS AS EASY AS 1, 2, 3
If you don’t have our Particle Separator installed, no worries though, our new filter is super easy to clean. Just follow the steps below to breathe new life into your dirty filter. If the filter media or rubber looks damaged, do not re-use.
Step 1
First, make sure to wear protective eyewear throughout the cleaning process. Remove the dirty air filter from the UTV’s airbox and lightly tap the top several times on a hard service to knock out any debris, being careful not to bend the cage or pleats.
Step 2
Blow out the filter from the inside out using the nozzle no closer than 1″ from media. Continue to move nozzle taking care not to focus it on one specific area. Use an OSHA approved regulator at no more than 30psi.
Step 3
Use the nozzle to blow out the outside of the filter an angle to remove any large debris that was not removed in Step 1 and 2. Be careful not to blow debris back into media. Then blow out once more from the inside out.
- 2015 – 2020 POLARIS RZR 900
- 2015 – 2020 POLARIS RZR S 1000
- 2016 – 2020 POLARIS GENERAL
- 2016 – 2019 POLARIS ACE
