Product Description

Mount Your Whip Correctly on the Polaris Xpedition

The Polaris Xpedition isn't built like a traditional tube-cage UTV, which can make mounting a whip or safety flag cleanly more difficult. The Chupacabra Offroad Xpedition Whip Flag Mount solves that problem with a vehicle-specific design made to position your whip properly while keeping the installation clean and secure.

Unlike Chupacabra's standard universal whip mount, this version uses a corrected 27° mounting angle specifically for the Polaris Xpedition. When combined with Chupacabra's Lo-Pro Mount, the assembly is designed to work with the Xpedition's rear glass without requiring you to cut, modify, or compromise the factory setup.

The mount provides 360° of adjustment in 15° increments, allowing you to fine-tune the whip position instead of being stuck with a fixed mounting angle. Once positioned, the mount locks securely in place to handle vibration and movement encountered off-road.

A standard 1/2-inch whip mounting hole provides compatibility with common UTV whip and flag setups, while the heavy-duty M12 locking screw helps keep the assembly firmly positioned.

Construction is equally important on a part that's going to live outside in dust, mud, rain and constant vibration. Chupacabra machines the mount from billet aluminum and finishes it in hard-anodized black for a clean appearance and increased durability.

For Polaris Xpedition owners who want to add an LED whip, dune flag, safety flag or similar accessory without settling for an awkward universal mounting solution, this is a clean way to do it.

 Key Features

• Designed specifically for the Polaris Xpedition
• Corrected 27° mounting angle
• Full 360° adjustment
• Position adjustments in 15° increments
• Locks securely into the selected position
• Industry-standard 1/2" whip mounting hole
• Heavy-duty M12 locking screw
• Billet aluminum construction
• Hard-anodized black finish
• Compatible with Chupacabra Offroad's 4-screw mounting system
• Lo-Pro configuration designed to work with the Xpedition rear glass without modification
• Works with a wide range of UTV whips and safety flags

 Why Upgrade?

A whip mount seems simple until you're trying to find somewhere clean to install one on an Xpedition.

Generic mounts can leave the whip leaning at an odd angle, interfere with bodywork or glass, or force you to compromise where the whip is positioned.

This Xpedition-specific mount addresses that problem with the corrected 27° geometry and adjustable mounting head.

The big advantages are:

Cleaner installation
Designed around the Xpedition instead of adapting a generic mount.

Adjustable whip position
Rotate the mount through 360° and select the angle in 15° increments.

Rear-glass compatibility
Using the Lo-Pro mounting option allows the mount to fit with the rear glass without modification.

Strong mounting point
Billet aluminum construction and an M12 locking screw provide a solid platform for your whip.

Standard whip compatibility
The 1/2" mounting hole works with the common mounting size used by many UTV whips.

 Fitment

Vehicle Fitment

Polaris Xpedition

This mount was specifically redesigned for the Xpedition platform with its corrected 27° mounting angle.

Important Fitment Note

If the vehicle has factory/rear glass, I would strongly recommend offering the Lo-Pro Mount option.

Chupacabra specifically states that pairing the whip mount with its Lo-Pro mount allows installation with the Xpedition back glass without modification.

 Specifications

The MFG part number is corroborated by multiple current retailer listings.

 What's Included?

This is one area where I would make the Shopify variants very clear, because retailer listings currently show different clamp configurations.

I would set the variants up as:

Clamp Option

• No Clamp
• Lo-Pro Mount

Retailers currently list both configurations, while Chupacabra's own page describes the product as sold individually and references an included clamp depending on configuration.

American UTV recommendation:
For an Xpedition equipped with rear glass, choose the Lo-Pro Mount configuration.

 Who Is This For?

This mount makes sense for Polaris Xpedition owners running:

• LED whips
• Lighted safety whips
• Dune flags
• Safety flags
• Trail flags
• Camp/location whips
• Other accessories using a standard 1/2" mounting stud

It's particularly useful for Xpedition owners who want a clean installation that works around the rear glass instead of adapting a generic roll-cage mount.

Why Buy From American UTV?

At American UTV, we're not interested in simply loading thousands of part numbers onto a website and hoping you figure out what works.

We're a hands-on off-road shop that installs, repairs, diagnoses and builds UTVs. That real-world experience changes how we recommend parts.

If you're putting together a Polaris Xpedition and aren't sure which whip, mount, lighting accessory or other component will work with your setup, contact American UTV before ordering. We'd rather help you build the right combination the first time.