EVP High Flow Intake (HFI) Kits for Can-Am Maverick X3
Free returns on all eligible orders
You have 30 days to request a return. All sale items are final sale.
Description
Don't limit your engine's power output potential with a restrictive OEM air box! The all-new EVP High Flow Intake (HFI) Kit for Can-Am Maverick X3 turbo (all models except XMR) solves the inherent issues with the OEM intake system by delivering smooth, undisturbed airflow to the turbocharger and increasing airflow which translates into MORE power‚ particularly for big turbo and/or tuned ECU applications! Gain upwards of 15 HP when paired with EVP DS-355 (or higher) turbo systems, or a solid 5-10 HP on stock turbo applications.
Turbochargers are most efficient when the air entering the inlet has the least amount of restriction as possible. The OEM air box, due to its canister design, is not only restrictive, but the air entering the compressor section of the turbo is turbulent. These two factors limit the power the engine can make, particularly on big turbo/high-horsepower vehicles.
EVP's new proprietary HFI design is offered in three unique kits tailored specifically for Stock turbochargers, EVP Paragon and Desert Storm turbo systems. The EVP HFI features a free-flowing design that supplies smooth, uninhibited airflow to the turbocharger inlet. The low-restriction/high-flow filter element, EVP pre-filter and smooth silicone elbow tubes with gradual diameter taper all result in greater airflow efficiency, which means MORE POWER!
Installs directly into the OEM air filter tray without modifications, keeps all of the clutch ducts and is also compatible with the OEM air filter cover so you can keep it stealthy or run it wide open.
All EVP HFI Kits Include:
- EVP HFI MAX Filtration High-flow air filter
- EVP Pre-filter
- EVP 45mm/Stock, 47mm/Paragon, OR 76mm Desert Storm Turbo Silicone Hose
- EVP HFI Intake Foam Clutch Duct Insert for stock air filter tray
- EVP HFI 4' to 3' Intake Reducer
- EVP full hardware kit for an easy installation
EVP HFI FEATURES
- More HP and faster spooling turbocharger characteristics (5-15+ HP depending on power/boost levels)
- Clean, stealthy direct-replacement HFI that installs directly into the OEM air filter tray (no cutting required)‚ bolt on and go!
- Can be used with or without the stock air box cover
- Kits available for stock turbos (45mm), as well as EVP Paragon (47mm) and Desert Storm (76mm) turbo systems
- Compatible with the factory CVT clutch duct
- Includes all hardware necessary for installation
FITMENT
2017+ Can-Am Maverick X3 Models (EXCEPT XMR)
INSTRUCTIONS
EVP High Flow Intake (HFI) Kits for Can Am Maverick X3
EVP High-Flow Air Filtration Media With Prefilter
MAINTENANCE
- Air filter maintenance should be adjusted according to riding conditions
- Air filter maintenance must be increased in frequency when riding on snow, dry sand, dirt, gravel, or similar conditions that have a high dust or particle dispersion
- Riding in a group in these conditions will require increasing the air filter maintenance frequency further.
- Inspect the filter for any signs of leaks. A streak of dust on the clean side of the filter is a telltale sign. Replace filter if there is any damages. Eliminate any source of air leaks before installing a new filter. Clean engine air filter by tapping out heavy dust from paper element, this will allow dirt and dust to get out of the paper filter.
- Purchase a replacement air filter if needed; available online HERE.
Shipping information
Use this text to share information about your product.
Returns & warranty
Use this text to share information about your product.